The main control room is set up for plywood machinery, which can realize automatic or manual operation according to the PLC program from particle metering, sizing, molding, hot pressing to edge weighing. In addition, the operating platform (box) is set up at the operation site of each section (except the forming hot pressing section), to control and monitor the operation of the equipment in this section, and to automatically run, so as to provide assistance for the production of plates.
The process of directional plywood machinery can be divided into particlepreparation section, drying and screening section, glue mixing and supplying section, sizing section, forming hot pressing section, sawing section, sanding section, electric control system and other processes. The wood raw materials are sent to the long wood planer by the feeding conveyor, and then cut into qualified shavings at one time. And the air is sent to the wet shaving bin, and the quantitative output shavings from the wet bin are sent to the rotary dryer through the screw conveyor. The dried particlesare then sent to the screening machine for screening and drying. The surface and core layer mixed glue is configured in the centralized glue mixing machine. The preparation and application system of the mixed glue is controlled by PLC program. According to the process specification, automatic measurement, continuous configuration, quantitative application and adjustment can be implemented. The surface layer and core layer mixed glue is configured in the centralized glue mixing machine. The preparation and application system of mixed glue is controlled by PLC program. Automatic measurement, continuous configuration, quantitative application are implemented according to the process specification, and can be adjusted.
Directional plywood machinery manufacturers to provide manufacturers with suitable machine equipment selection scheme, to meet the needs of different customers, fully automatic operation, save labor and labor.