How to use veneer dryer of plywood machine?

Veneer dryer is a kind of drying equipment for wood setting and dehydration. There are many main heating methods. It is a kind of equipment suitable for large and small batches. It can directly burn biomass fuel, wood scraps and waste wood. As a heat source, it is not easy to damage, and the product can be disassembled for easy cleaning and maintenance.

How to use veneer dryer of plywood machine?

Its working principle is to transport the wood board to the equipment, drive the mesh belt to move back and forth in the dryer by the transmission installation, clean and stable hot air flows through the materials, and water vapor is discharged from the drainage holes, so as to achieve the purpose of drying. The drying speed is determined by the variety and water content of the wood board, and the air flow direction adopts negative pressure and porous air intake, so as to ensure the effective drying area and improve the quality of the wood board effect.

Different from the traditional drying machine, one machine is multi-purpose, time-saving, labor-saving, labor-saving, combined flow line operation, can also be customized according to the demand, can run alone, can also be used with other equipment.

How to use veneer dryer of plywood machine?

According to the requirements of the drying equipment for the site, it is required that the horizontal place should be placed, the ventilation should be good, the drying should be kept, the moisture-proof and moisture-proof should be well done, and the corrosion should be prevented. The working room should be kept clean. If it is put indoors, it should keep a certain distance from the wall. It is suggested that the distance from the wall should be more than 2m.

When using, adjust the temperature and drying humidity before putting the sample into the hot air circulation oven. Connect the power supply and turn on the switch of the drying room to ensure the temperature uniformity of the drying room. When placing items, do not place too close. Do not put items on the bottom of the drying room, so as not to affect the hot air circulation. Do not bake inflammable, explosive, volatile and corrosive items.

No matter what kind of dryer, it is equipped with the operating instructions of the manufacturer. When we use the dryer, it is necessary for the workers to skillfully operate the equipment, meet the specific requirements of its parameters and materials, and strictly control the particle size and purity of the feed, so as to prevent the unsafe drying effect and the harm to the equipment.

When the dryer completes the processing of a unit, we should first send someone to do a good job in the cleaning of the equipment, timely check whether there is abnormality in the given parts of the equipment, ensure that the daily operation of the dryer is normal, enhance the durability of the equipment, and extend the service life of the drying equipment.

-------------END-------------