How to reduce the noise of card less rotary cutting machine

Card free rotary cutting machine is the equipment we use in the wood manufacturing industry. In the process of using, some matters need to be paid attention to. Now let's carefully understand the knowledge introduction in this respect?

How to reduce the noise of card less rotary cutting machine

Because there will be noise in the process of using the product, some methods can be used to change it. During the processing of wood chips, after cutting, the material will bounce to the inner wall of the machine and make a lot of noise. This can be dealt with by adding wear-resistant lining plate. In the drive surface of the feed plate and feed inlet, adding damping data with the housing cover can reduce the noise radiation surface.

During the operation of the card free rotary cutting machine, the feeding speed should not be too slow or too fast. If the feeding speed is too slow, the noise will be greater. If the feeding speed is too fast, the machine load will increase, and the production speed will decrease, and the wear degree of the machine blade will be great.

-------------END-------------