Maintenance of rotary cutting machine starts from operators

The most common contact of rotary cutting machine is the operator, from the start to the end, so the maintenance of mechanical equipment, rather than put the heavy burden on the maintenance workers, it is better to make the operators form good habits.

Maintenance of rotary cutting machine starts from operators

Once the rotary cutting machine is abnormal, it needs a few hours of time and space, and then it can be put into use after normal operation. After a week of use, check whether all the bolts fastening the blades in the working room of the rotary cutting machine are loose, and whether the blade clearance is correct, and adjust and tighten them. Check whether the connection of air circuit of rotary cutting machine is correct and the machine must be grounded to ensure safety. Arrange the plastic waste to be broken to ensure that the materials are free of miscellaneous matters and the feeding specifications are generally uniform. Before each start-up, check whether there are sundries in the working room of the rotary cutting machine.

-------------END-------------