Three common wear points of rotary cutting machine during operation

Rotary cutting machine this kind of equipment and machine in the use process, wear is the most common phenomenon. There are many factors affecting the wear of the rotary cutter. Today, we will only talk about the common losses in the production process.

Three common wear points of rotary cutting machine during operation

The first one: because the logs are not round and uneven in thickness, their rotary cutting is not continuous, resulting in a part of the broken veneer can not be used;

The second is that the end loss is caused by the clamping head of the rotary cutting machine on both ends of the wood section, which makes the rotary cutter blunt, reduces the cutting speed, and also affects the quality of the board;

The third is core loss. The waste produced by veneer rotary cutting is broken veneer and wood core, which leads to the waste of wood resources.

-------------END-------------