Cleaning method of bearing part of veneer dryer

The reason why people are tired is that they often linger between persistence and giving up, hesitating. There will always be something worth remembering and something we have to give up. To give up and persist is an attitude of everyone to face life problems. Dare to give up is a kind of atmosphere, dare to insist is not a kind of courage, which is right or wrong, who can say the clear way? If we can know the choice, can do to adhere to the insist, give up the give up, then how good.

Cleaning method of bearing part of veneer dryer

 

Problems to be noticed in bearing cleaning of veneer dryer:

1. The newly installed tyre is easy to loose and must be checked frequently.

2. Pay attention to the operation of each part of the veneer dryer.

3. Dust and other materials shall be removed from the underframe plane of the mobile device to prevent the movable bearing from moving on the underframe when the machine encounters materials that cannot be broken, so as to cause serious accidents.

4. If there is any impact sound during the operation of the rotating gear, stop the machine for inspection immediately and eliminate it.

5. Pay attention to check the wear degree of easily worn parts and replace the worn parts at any time.

6. If the bearing oil temperature of veneer dryer rises, stop the machine immediately to check and eliminate the cause.

How to clean the bearing part of veneer dryer? -, veneer dryer or yellow sand dryer belongs to rotary dryer. Generally, it is suitable for granular materials, and it can also be used for drying sticky paste materials or materials with high moisture content. Especially drying veneer, Songshan veneer dryer drying effect is excellent. The advantages of single plate dryer or yellow sand dryer are large production capacity, wide application range, small flow resistance, large allowable fluctuation range in operation, convenient operation, etc.

The bearing of the bearing crusher bears all the load of the machine, so good lubrication has a great influence on the bearing life, which directly affects the service life and operation rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and sealed well. The main oil injection place of the veneer dryer (1) the rotating shaft veneer dryer bearing (2) the roller bearing (3) all the gears (4) the movable bearing and sliding bearing Plane.

-------------END-------------