In the process of using the hot press produced by the plywood machine hot press manufacturer here, it is necessary to pay attention to its use steps. Only the correct use can reduce the damage to the machinery, so what should be done?
In the process of using, the first thing to pay attention to is the sequence. Generally, it needs to connect the air source first, pull up the pressure regulating button, adjust the compressed air pressure, and then adjust the pressure in a clockwise direction. Secondly, it needs to place a partition of appropriate thickness on the working face of the machine, and then it needs to connect the 220V AC power supply to switch the power supply Open, but at this time, it will be found that the cylinder slowly drops until the set pressure is reached, so that it can be used.
Do you know the above knowledge? If you have any questions, you can consult with us. For your questions, we will make a brief introduction. Here, we will serve you wholeheartedly.