Why veneer rotary cutting machine manufacturers will be stuck

The saw blade is not tightened or the saw blade is aged and there is no saw path; the belt or transmission gear slips or is damaged and needs to be adjusted or replaced; the wood is too hard and the machine power does not match, for example, the motor is too small or the input circuit core is too thin and the voltage is too low and the speed is not enough. Veneer rotary cutter manufacturers are suitable for making miscellaneous wood, eucalyptus, maple, pine and other wood.

Why veneer rotary cutting machine manufacturers will be stuck

The technical requirements for workers are not high. The product adopts modular assembly, cast iron bevel cutter table, imported digital control system, high-strength wear-resistant alloy screw, and high-strength helical gear hard tooth surface reducer and other transmission and feeding systems; the roller is processed by special process, which makes the rotary veneer with high precision, more uniform, flat and low maintenance rate. It is the model of rotary cutting and shearing machine.

Digital board thickness changes. The angle of the blade or saw blade needs to be adjusted to reduce excessive resistance, and the blade or blade needs to be polished to ensure the sharpness. The user can check the blade one by one according to the specific situation, and the root cause of the problem should be found. Do not panic when the veneer rotary cutting machine manufacturer is stuck. Check the instructions carefully. If you can't solve the problem, find a professional to repair it. I believe that the rotary shear machine can bring us more economic benefits.

Now, whether in home decoration or in other aspects, the demand for wood is increasing year by year, so in order to meet the needs of the market, and a large number of logging, put into production and processing. However, in the process of production and processing, many factories still use old-fashioned processing methods, such as this old-fashioned processing method is very expensive and time-consuming, so in order to respond to the concept of green sustainable development, the green development mode of wood processing industry is rotary shear integrated machine.

It can be on the basis of the original, is the utilization rate of wood processing has been greatly used, and veneer rotary cutting machine manufacturers produced wood quality is far higher than the original. So now wood processing has no longer used the old-fashioned processing methods, with the emergence of rotary cutting shear machine, suitable for the needs of market development.

-------------END-------------