In order to ensure the smooth operation of the non card rotary cutting machine, it is necessary to accurately adjust its parameters, mainly including what we need to know next.
How to adjust the running shaft of the non card rotary cutting machine? Generally, the processing shaft of the rotary cutting machine will be countered with a thimble, and the thimble can meet the coaxiality requirement of 0.01. Therefore, if there is a problem of shaft running, you can start to observe from the thimble, and if there is a problem with the thimble, you can replace the thimble. Then for the pressure of the rotary cutting machine, the triangle ruler can be used to lean against the upper part and the inner side of the double knurled roll of the rotary cutting machine, and the ruler can be used to stand against the upper part of the single knurled roll to observe the value of the joint between the lower edge of the triangle ruler and the ruler. If you want to increase the pressure of the rotary cutter, you need to increase the gasket between the single box and the blade shoulder on both sides; when the pressure is reduced, you need to reduce the gasket.
The other is to adjust the cutter height of the card free rotary lathe. When adjusting, the loosening bolts on both sides should be loosened first, then the screws at both ends should be adjusted to make the gap between the knives meet the required height.